Hot Spot Cast Iron Gray High-Heat Spray Paint
builds tough, reliable products that are easy to use. When ordinary paint can’t handle the heat, you can trust Hot Spot Cast Iron Gray High-Heat Spray Paint to deliver the protection you need and the sleek finish you want.
Hot Spot is engineered for grueling temperatures and hard use. A silicone resin system forms a porcelain‑like bond under heat, so the finish stands up to 1200°F continuously. It resists peeling, blistering, discoloration, and loss of adhesion, even through repeated heat cycles.
Use it direct-to-metal with no primer on headers, manifolds, mufflers, grills, fireplaces, and more. This flat Cast Iron Gray enamel delivers excellent color retention and protection. It comes in multiple other colors to match the look of the surface you’re fortifying.
Turn up the heat without risking your finish! Choose Hot Spot for an attractive, protective finish with the easy, consistent application only an aerosol spray can give you.
1200°F Heat-Resistant Spray Paint!
High heat discolors ordinary paint and causes blistering and flaking. Hot Spot is engineered to hold up under extreme circumstances. In fact, it thrives.
After a proper heat cure, this heat-resistant enamel coating can withstand continuous temperatures of up to 1200°F (648°C). You get dependable protection where other finishes fail.
To reach maximum durability, heat‑cure Hot Spot at 400°F for 2 hours. Then, put it to work on engines, turbo housings, exhaust manifolds, grills, fireplaces, and furnace components.
Quick Facts
- Cast Iron Gray high-heat-resistant spray paint
- Flat finish
- Withstands continuous heat up to 1200°F (648°C)
- Silicone resin system
- Direct‑to‑metal application
- Do not use primer
- Touch dry in 20 minutes
- Hard cure when heated to 400°F for 2 hours
- Coverage up to 15 square feet per 12-oz can
- Abrasion-resistant
- Gas- & oil-resistant
- Excellent durability
- Shelf life guaranteed for 2 years
Superior Strength. Excellent Durability & Resistance.
Heat, temperature swings, and exposure to fuels and oils can be tough on coatings. Our high-heat spray paint solves that with a silicone enamel that heat‑cures into a hard, ceramic‑like film. The result is durability you can see: excellent color retention, strong abrasion resistance, gasoline and oil resistance, and corrosion protection that helps these metal surfaces last.
Hard‑working parts need a hard‑working coating. Hot Spot looks good longer and protects what is underneath.
Easy Direct-to-Metal Application
The genius of an aerosol spray is that it provides easy, consistent, and even coverage. Since it’s Hot Spot, it’s also engineered to last.
Hot Spot Cast Iron Gray High-Heat Spray Paint is powerful protection without a complicated process. It sprays on smooth and sleek, goes direct-to-metal with no primer, and dries to the touch in about 20 minutes. After a heat cure at 400°F for 2 hours, the silicone resin forms a hard, porcelain-like film that grips the surface and stands up to extreme heat.
The payoff is simple: fast, consistent application from a convenient aerosol can, strong protection, attractive finish, and coverage up to 15 square feet per 12-oz can, so you can do more with less.
Quality, convenience, affordability, you get it all.
Won’t Peel, Blister, Discolor, or Lose Adhesion
High heat and rapid cycles make typical paints lift, bubble, and fade. Our Cast Iron Gray heat-resistant enamel spray doesn’t have that problem.
When heated, the silicone enamel locks onto the surface. After a proper cure, it resists peeling, blistering, and discoloration, even through repeated heat cycles. So you get the sleek, uniform finish you want for longer.
Suggested Uses for Hot Spot Heat-Resistant Coating Spray
Our Hot Spot Cast Iron Gray High-Heat Spray Paint is designed for high-temp surfaces in the garage, shop, and home, like:
- Headers
- Manifolds
- Mufflers
- Exhaust Pipes
- Diesel Stacks
- Furnaces
- Grills
- Fireplaces
- Wood-burning stoves
Made in the USA.
Reviews
There are no reviews yet.